You are here:

Physical Machine Actions

When you select a physical machine (PM), some or all of the following action buttons appear, with inactive buttons grayed out, depending on the PM's state and activity.

Caution: Use the Physical Machines page of the ztC Console when you perform maintenance on a PM. Avoid using controls on the computer, because the ztC Console protects the ztC Edge system from most actions that are potentially disruptive.

Commands	Description
Identify	Flashes the SYS LED on the node selected beneath Name. See Identifying a Physical Machine.
Work On	Enters a PM into maintenance mode. VMs running on this PM migrate to the other PM, if it exists and is in service. (Otherwise, you are asked to re-confirm the request and then shut down VMs.) When VMs are migrated or shut down, the PM displays running (in Maintenance). See Maintenance Mode.
The following actions are available on some systems after clicking the Work On button, when the PM has entered maintenance mode.
Finalize	Removes a PM from the state running (in Maintenance). See Maintenance Mode.
Shutdown	Shuts down a PM. The PM transitions to off (in Maintenance). See Shutting Down a Physical Machine.
Reboot	Reboots the PM. The PM transitions to preparing for reboot (in Maintenance). See Rebooting a Physical Machine.
Remove	Causes the Stratus Redundant Linux software to delete the PM from the ztC Edge system’s database, so that you can replace the PM or one of its components. See Replacing Physical Machines (Manual).
The following action may be available when a PM has failed or when the Stratus Redundant Linux software has removed a PM from service and powered it off, due to an excessive failure rate.
Recover	Recovers a failed PM. In some cases, the ztC Console displays the state of a failed PM as Unreachable (Syncing/Evacuating…). See Recovering a Failed Physical Machine (Manual).

Related Topics

The ztC Console

Using the ztC Console

The Physical Machines Page

Product Support and Downloads ztC Edge Support ztC Edge Downloads Phone: (US Toll-Free) 866-763-1813 Phone: (International) 602-852-3094	About Stratus U.S. Operations 5 Mill and Main Place Suite 500 Maynard, MA 01754-2660 978-461-7000 Worldwide Office Locations Contact Stratus
Product Documentation (PDF Format) ztC Edge User's Guide ztC Edge 100i/110i Systems: Deploying a Dual-Node System (R012Z) ztC Edge 100i/110i Systems: Replacing a Node (R013Z) ztC Edge 100i/110i Systems: Deploying a Single-Node System (R014Z) ztC Edge 100i/110i Systems: Adding a Node (R015Z)	About Help Help created at 10:29 PM on 4/29/2021.